The ZOOM H8Handy Recorder The only recorder that adapts to your way of creating There’s An AppFor Your WorkflowWhether you’re capturing audio on location, recording music, or producing a podcast, the H8 color touchscreen adapts to your project’s needs with three App-driven interface options. All with the touch of your finger. The Podcast AppThe PODCAST App makes high-production quality simple. With dedicated Sound Pads, use the touch screen to trigger sound effects, music beds and more. Choose from 13 high quality sounds or load your own via an SD card.The Podcast app accommodates up to 4 mics and two Sound Pad channels. The Music AppThe MUSIC App puts all the important controls at your fingertips: audio levels, faders, metering and more. With 10 inputs and 12 tracks, capturing a large group is easy. Mix, overdub, and enhance your recordings with EQ and compression. Connect to Zoom’s Guitar Lab via USB to access an endless assortment of amps and effects. The Field AppThe FIELD App is ideal for location sound, sound design, conferences, and more. It gives you instant access to large meters for every track, so you can make sure your recordings never clip. Adjust input type, lo-cut, compress, limiter, noise gate, and other key settings. The Mic CapsuleThe H8 comes with the Zoom XYH-6 microphone. This capsule provides two matched high-quality unidirectional mics, for capturing signal directly in front of the recorder. With the Zoom mic capsule system you can easily swap capsules to ensure you’re always using the right mic for the job. SIX INTERCHANGEABLE MIC CAPSULESXYH-6 Mic Capsule: This X/Y capsule comes standard with the H8. The capsule adds two matched high-quality unidirectional microphones to your H8. This Mic is most sensitive to signal coming directly in front and less sensitive to signal coming from behind or from the sides, in technical terms, they are said to utilize a cardiod polar pattern.MSH-6 Mic Capsule: Mid Side Mic Magic. MS ("Mid-Side") recording is an incredible technique that allows you to actually adjust the width of the stereo image after it has been recorded, making it especially useful for film, video and television projects.XYH-5 Mic Capsule: X/Y stereo recording allows you to cover a wide area yet still capture a strong center image. This microphone capsule features two matched unidirectional condenser micrphones set at a 90 degree angle and housed within an advanced shockmount to minimize vibration and handling noise, making it ideal for location videography and live broadcast/podcast applications.SGH-6 Mic Capsule: This Shotgun capsule adds a professional quality hyperdirectional (that is, highly directional) microphone turning your H8 into the perfect audio recorder for anyone working with film, video or live theater, or for ENG (electronic news gathering) applications.EXH-6 Mic Capsule: If you need more inputs, simply plug in the EXH-6 Dual XLR/TRS Combo capsule. It allows you to connect two additional discrete channels for external microphones, instruments, mixers or portable music players.SSH-6 Mic Capsule: This mid side stereo shotgun capsule includes a super directional microphone for picking up sound in the center as well as a bidirectional side mic for picking up sound from the left and right. This allows you to record a fully mono-compatible stereo image ideal for film, video and television projects. For example, you can capture dialogue with the center mic, and then mix in the desired amount of enviromental sound captured by the side mic directly on your Zoom recorder, or in postproduction. A hairy windscreen is included for reduction of wind noise. Next Generation Capsule SystemZoom’s Capsule System 2.0 allows up to 4 channels of audio to be added to the H8's capsule connection, creating new ways to expand your recording capabilities.XAH-8COMBINATION XY/AB MICThe XAH-8 capsule delivers pristine stereo recordings. Easily rotate the capsules from a tight XY pattern to a wide AB pattern to enhance the stereo image of your recordings. VRH-8AMBISONIC MICThe VRH-8 is an Ambisonic mic capsule that utilizes four condenser microphones to deliver immersive 360 audio recordings. A built-in accelerometer helps ensure the capsule is always perfectly aligned, while the on-board Ambisonic decoder automatically handles the necessary conversions, saving you time in post-production. EXH-8EXPANDER CAPSULEThe EXH-8 capsule provides 4 additional XLR inputs, giving you a total of 10. Each additional input has a dedicated gain knob and pad switch. You can even use your favorite condenser microphones—just connect a power source to the EXH-8 capsule to supply phantom power. Remote ControlYou can monitor level meters and hit REC,PLAY, and STOP in each H8 application mode. Just insert the BTA-1 to your H8 and connect to your iOS device. The H8 Control App is freely available from App Store.*BTA-1 sold separately. Inputs & OutputsH8 offers 4 XLR inputs with dedicated pad switches and gain control. 2 additional XLR/TRS combo jacks with Hi-Z switches allow you to capture line level signals, microphones, or directly record electric guitars and basses.Monitor tracks using the built-in 1/8” headphone output or connect directly to your camera using the dedicated stereo line output. Multi-Channel Audio InterfaceThe H8 is a powerful USB audio interface. Connect via USB to your PC, Mac, or iPad for up to 12 channels of simultaneous recording. Recording Time & File FormatsGet more than 10 hours of recording time from just 4 AA batteries. Or record forever with the optional AD-17 adapter.The H8 records BWF-compliant WAV and MP3 files in any of the following formats:44.1kHz/16-bit, 44.1kHz/24-bit, 48kHz/16-bit48kHz/24-bit, 96kHz/16-bit, 96kHz/24-bit State-of-the-Art EditingThe Zoom H8 comes with a free download license for Cubase LE and Steinberg’s WaveLab Cast software. WaveLab Cast helps you to finalize your project with a wide range of comprehensive editing, mixing, and refinement tools. PodcastingWaveLab Cast connects you directly with podcast directories, such as Spreaker or Podbean*. You can upload episodes quickly, plus directly create and publish RSS feeds. Audio for Video Import your video file and WaveLab Cast will automatically extract the audio. You can use the editing tools to lower unwanted noise, change levels and remove loud sibilants. Metering options allow you to build new tracks, fade-in your music, use EQ and compression. Re-attach the audio to the video file using WaveLab Cast’s export functions. Field RecordingWaveLab Cast supports up to 96KHz audio quality and includes a high-end re-sampler. RestoreRig removes noise and unwanted sounds. You can assemble new files using the snap functions and crossfade options. Once you’re done, export your sound files in any popular audio format.For information on license activation and upgrades, visit our Steinberg Software support page. What’s in the Box Here is what comes included in the package: H8 Handy Recorder XYH-6 X/Y Mic Capsule AA Batteries (x4) Quick Guide Steinberg Cubase LE download software Steinberg WaveLab Cast download software Optional Accessories WSH-6 Foam Windscreen for XYH-6 WSU-1 Universal Windscreen PCH-8 Protective Case for H8 XYH-5 XY stereo mic capsule MSH-6 MS stereo mic capsule SGH-6 Shotgun mic capsule SSH-6 Stereo Shotgun mic capsule EXH-6 Dual XLR/TRS Combo capsule HS-1 Hot Shoe Mount adapter ECM-3 Extension Cable (3 meters) ECM-6 Extension Cable (6 meters) HRM-7 Handy Recorder Mount (7 inches) HRM-11 Handy Recorder Mount (11 inches) AD-17 AC Adaptor SCU-40 Universal Soft Shell Case ZDM-1PMP Podcast Mic Pack H8 Features: Customized applications for field recording, music and podcasting 3 distinct interfaces for field recording, music and podcasting Interchangeable input capsules 12-track simultaneous recording Four mic inputs and two XLR/TRS combo connectors Gain control knobs and -20dB pads for each input Supplied XYH-6 X/Y capsule provides secondary input via a stereo ⅛” Mic/Line In mini phone jack Phantom power for all six XLR mic inputs: +24/+48V Large color LCD touchscreen display Records directly to SD, SDHC and SDXC cards up to 512GB Up to 24-bit /96kHz audio in BWF-compliant WAV or a variety of MP3 formats Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take Built-in effects, including low-cut filtering, compression, and limiting Multichannel and stereo USB audio interface for PC/Mac/iPad Accepts standard AA alkaline or NiMH rechargeable batteries Over 10 hours of operation with 4 AA alkaline batteries
The ZOOM LIVETRAK L-8 Podcasting, Music and Beyond The Board for Creators Creators are evolving—and so are we. Zoom LiveTrak L-8 makes it easier than ever to mix, monitor and record professional-sounding podcasts and music performances in one portable, affordable package. Power to the Podcast Podcast creators are a special breed. They require a unique set of audio features, along with the flexibility of a proper mixing console. The LiveTrak L-8 combines Zoom’s famous audio performance with features made for podcasters. Sound Pad Magic Just press a button to play intros, outros, jingles, ads and sound effects. With 6 easily-assignable Sound Pads, the right sound is at your fingertips. First-Time Caller, Long-Time Listener Remote interviews are a snap with the L-8; just connect your phone via the provided TRRS cable. The Mix-Minus function automatically prevents echo and feedback to and from the caller. Or use the USB connection to route audio from Skype, Facetime, Hangouts, Slack and more. Freedom of Speech Zoom’s preamps are famous for a good reason: they’re transparent, powerful and ultra-reliable. The L-8 features six independent Zoom preamps, built to handle anything from a whisper to a raucous debate. A Track for Everyone The pros know that when you record everyone on their own separate track it just sounds better and provides more flexibility in the edit. The L-8 records separate tracks directly to your SD card, enabling you to edit them later. Hear Yourself Talk If you can’t hear yourself, how are you supposed to speak your mind? The L-8 is equipped with four headphone outputs, so that each participant can clearly hear what is going on. On Air, On the Move The Zoom LiveTrak L-8 can run up to 1 ½ hours with just four AA batteries, or on a USB battery, so you can podcast from anywhere. Record Twice, Once Used as an audio interface, the L-8 can record full episodes directly to your computer and an SD card simultaneously. You can also live stream while recording. L-8 is class compliant, enabling connection with iOS devices. Apple Lightning to USB Camera Adapter required. Save Settings.Save Time. Once you’ve dialed in your mix…save it! The L-8 lets you save up to 7 show “scenes” that can be saved and instantly recalled at the press of a button "The L-8 is a game-changer for podcasters." Ming Chen A Shared Universe Podcast Studio, Podcaster, Entrepreneur and Creator The Board for Musicians Small in Size Big on Sound From singer-songwriters to small bands, the L-8 is the ideal mixer and recorder for musicians who may be small in number, but big on sound. Coming Through Loud & Clear The L-8 features six high performance preamps each with phantom power, a low noise floor (-121dBU EIN), and maximum input gain of +54dB. Additionally there are two each Hi-Z, line-level and USB inputs. You can also fine-tune each channel with EQ and onboard effects. True Multi-Track Recording The L-8 lets you record up to 10 discrete tracks plus a stereo mix directly to an SD card at resolutions up to 24-bit/96 kHz*. You can punch-in and overdub with ease, then transfer your work to your favorite DAW for fine tuning. *Effects, EQ, overdub, and audio interface are not available in 96 kHz. Go Out & Play No outlet? No worries. Get up to 1 ½ hours of power from just four AA batteries. You can also power using a USB battery, and with the L-8’s unique USB connection design, you never have to worry about accidentally disconnecting. Individual Monitor Mixes Never settle for that “compromise” monitor mix again. The L-8 provides three custom monitor mixes, so no matter where you are on stage, you hear exactly what you need. WHAT'S INCLUDED LiveTrak L-8 Mixer/Recorder TRRS Cable USB Cable AD-17 AC Adapter Quick Guide Features: 8-channel mixer (6 combo, plus 2 TS) 12-track simultaneous recording, 10-track playback Mix-Minus function preventing audio feedback from dial-in guests TRRS connection and included TRRS cable for phone connectivity 6 assignable Sound Pads, with 13 preset sounds 4 headphone outputs, consisting of 3 custom monitor mixes, plus one main mix 3-band EQ and a low-cut function 7 scene memories for storing mixes 12-in / 4-out USB audio interface Class-compliant mode (for iOS compatibility) Battery operated with four AA batteries or a USB power supply Record up to 24-bit/96kHz, record up to 48kHZ to computer and SD card simultaneously INPUTS AND OUTPUTS / NUMBER OF CHANNELS Inputs: MIC/LINE : 6 LINE : 2Output: MASTER OUT : 1 MASTER OUT (PHONES) : 1 MONITOR OUT (PHONES) : 3 INPUTS MIC/LINE: Type: XLR/TRS combo jacks (XLR: 2 HOT, TRS: TIP HOT) Input gain: +10 – +54 dB/–3 – +41 dB (when Hi-Z ON) Input impedance: XLR: 3 kΩ Input impedance: TRS: 3 kΩ/1 MΩ (when Hi-Z ON) Maximum input level: –2 dBu when –26dB switch OFF (at 0 dBFS) Maximum input level: +24 dBu when –26dB switch ON (at 0 dBFS) Phantom power: +48 VLINE: Type: TS phone jack Input impedance: 10 kΩ Maximum input level: +3 dBuSmartphone connection jack: Type: TRRS mini jack (4-contact/TIP: L, RING 1: R, RING 2: GND, SLEEVE: MIC) Input impedance: 10 kΩ Maximum input level: +3 dBu OUTPUT MASTER OUT: Type: XLR jacks (balanced) Maximum output level: +14.5 dBu Output impedance: 100 ΩMASTER OUT (PHONES): Type: Standard stereo phone jack Maximum output level: 10 mW + 10 mW (60Ω load) Output impedance: 10 ΩMONITOR OUT (PHONES): Type: Standard stereo phone jack Maximum output level: 10 mW + 10 mW (60Ω load) Output impedance: 10 Ω BUSES MASTER: 1MONITOR: 3SEND EFX: 1 CHANNEL STRIP LOW CUT: 75 Hz, 12 dB/OCTEQ: HIGH: 10 kHz, ±15 dB, shelving MID: 2.5 kHz, ±15 dB, peaking LOW: 100 Hz, ±15 dB, shelving Level meter: 9 segmentsSend effects: 8 types RECORDER Maximum simultaneous recording tracks: 12 at 44.1/48/96 kHzMaximum simultaneous playback tracks: 10Recording format: WAV 44.1/48/96 kHz, 16/24-bit, mono/stereoRecording media: 4GB–32GB SDHC-compliant cards (Class 10 or higher) 64GB–512GB SDXC-compliant cards (Class 10 or higher) AUDIO INTERFACE 44.1/48 kHz: Recording: 12 channels Playback: 4 channelsBit depth: 24-bitInterface: USB 2.0
The PodTrak P4 Podcast Recorder The Ultimate Recorder for Podcasting Compact, affordable, and loaded with features, the PodTrak™ P4 makes it easy to capture professional audio wherever you’re recording your podcasts. High Quality Mic Inputs The P4’s mic inputs feature Zoom’s professional quality preamps. Providing up to 70dB of gain, the P4 can be used with the most demanding microphones. Headphones for Everyone With 4 independent headphone outputs, each with a dedicated volume control, everyone can hear it all. Call-In Guests You and your guests are not always together. That’s why the P4 makes it easy to incorporate remote interviews. Just connect your phone to the P4 with a TRRS cable. Or connect your computer via USB, using your favorite conferencing software. With the P4’s built-in mix-minus feature, distracting echo and feedback will automatically be eliminated. Wireless Connectivity You can also use the optional Zoom BTA-2* Bluetooth Receiver to wirelessly connect your phone to record remote guests. *BTA-2 available separately. Produce Like a Pro The P4’s customizable Sound Pads can instantly trigger music, ads, jingles, and even pre-recorded interviews. Easily load your own sounds or choose from 11 pre-recorded presets. Go Where the Story Takes You The P4 operates up to 4 hours on 2 AA batteries, or you can also use a USB battery for extended recording time. Audio Interface The P4 can serve as a 2-input, 2-output audio interface, allowing you to record directly to your computer, Android or iOS* device. With the P4 you can also live-stream your podcast. * Apple Lightning to USB camera adapter required. What’s in the Box • PodTrak P4• AA Batteries (x2)• Quick Start Guide PodTrak P4 Features Four mic inputs with XLR connectors Four headphone outputs with individual volume control Gain control knobs and mute buttons for each input Phantom power for all XLR inputs Automatically prevent feedback from call audio using the Mix-Minus function Easily connect your phone using the TRRS connection Trigger sound effects using four assignable Sound Pads with 11preset sounds All input sources can be recorded on separate tracks 16-bit /44.1kHz audio WAV Records directly to SD, SDHC and SDXC cards up to 512 GB 2-input, 2-output USB audio interface Class-compliant mode for iOS compatibility Up to four hours of use with just two AA batteries or a USB power supply Specs INPUTS & OUTPUTS Number of input channels: 4 (mono/stereo) Number of output channels: 1 (headphone x 4) CONNECTORS MIC XLR jacks (2: HOT) Smartphone connection jack TRRS mini jack (4 contacts, TIP: L, RING1: R,RING2: GND, SLEEVE: MIC) USB USB Type-C (audio interface and mass storage functions) Note: Use a USB cable that supports data transfer. USB bus power is supported. DC 5 V USB Type-C (for power supply) Headphones 3.5 mm stereo mini PHANTOM POWER Phantom power +48 V RECORDER Recorder Formats: WAV 44.1 kHz, 16-bit, mono/stereo Recording media: 4 GB−32 GB SDHC-compliant cards (Class 10 or higher); 64 GB−512 GB SDXC-compliant cards (Class 10 or higher) AUDIO INTERFACE Audio interface 44.1 kHz, 16-bit, 2-in/2-out SYSTEM REQUIREMENTS FOR AUDIO INTERFACE MODE Windows OS: Windows® 10 Version 1703 or later (32bit, 64bit) CPU: Intel® Core i3 or faster* USB: USB 3.0 / 2.0** * Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD. ** Only USB host controllers with Intel Chipsets are supported. Operation is not guaranteed when used with USB hubs or expansion cards. Mac OS： macOS 10.13 ~ 11 CPU: Intel® Core i3 or faster USB: USB 3.0/USB 2.0* * Operation is not guaranteed when used with USB hubs or expansion cards. iPhone / iPad OS： iOS 12 ~ 14 * Apple Lightning-to-USB Camera Adapter required. Android OS： Android OS 7 / 8 / 9 / 10 * Please refer to the compatible android device list. POWER Power 2 AA batteries (alkaline, NiMH or lithium) • We recommend using NiMH AC adapter (ZOOM AD-17): DC 5 V/1 A (USB bus power is supported.) Est. continuous operation time using batteries Recording 44.1 kHz/16-bit/4ch audio to SD card (when 48 V is OFF and headphone impedance is 63 Ω) Alkaline batteries: about 4 hours NiMH batteries (1900 mAh): about 4.5 hours Lithium batteries: about 9 hours • The above values are approximate. • Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions. MISC. External dimensions 112 mm (W) × 155 mm (D) × 47 mm (H) Weight (unit only) 290 g
PodTrak P8 SET IT. EDIT. CAST. SIMPLE. Podcasting Simplified The Zoom PodTrak P8 is easy to use and can handle the most ambitious podcasts. With all the functions you need to record, edit and mix, the PodTrak P8 is your complete podcast studio. Touchscreen Controls The color touchscreen interface makes monitoring, adjusting and onboard editing seamless. Everything you need is a touch away. Mic Preamp Slider The Mic Preamp Slider allows you to dial in the level or gain of each mic. Make adjustments until the signal is peaking in the “Good Range”. Peaking in the “Over Range” section can cause distortion in your sound. Limiter The Limiter is used to prevent distortion if the volume suddenly gets too loud. Low Cut The Low Cut reduces low frequency noise that is present in almost any recording environment, whether it’s air conditioning, street sounds, vibrations, and other sources. Tone Adjustment The Tone Adjustment can make your voice darker or brighter, for that perfect podcast voice. Compressor/DeEsser Compressor/DeEsser enables your voice to have more presence for that perfect studio podcast sound. Noise Reduction In the On Air screen select Noise Reduction to decrease background noise by automatically turning down the mic levels for tracks not in use. It Speaks Your Language The P8’s touchscreen display can be set to any one of six languages. Choose from English, French, German, Spanish, Italian or Japanese Color-Coded The P8’s color-coded inputs, outputs, and controls make on-the-fly adjustments a breeze, keeping you focused on the discussion. Crystal-Clear Recording The PodTrak P8 features six of Zoom’s best-sounding mic inputs, providing pristine audio for you and your guests. With up to 70dB of gain the P8 can handle the most demanding microphones.* *Including the Shure® SM7B and Heil® PR 40. This Call Will Be Recorded The P8 features a dedicated channel for recording phone calls. Channel six can be switched to USB mode to record your guests from your computer. Both options include a Mix-Minus feature to prevent echo and feedback for the caller. On Air Button When a channel’s ON AIR is disabled, you can still hear the tracks through your headphones, but they won’t be recorded, or go through speakers or USB. Helpful when having sidebar conversations or prepping your guests during breaks. Wireless Connectivity Use the optional Zoom BTA-2* Bluetooth Adapter to wirelessly connect your phone to record remote guests. *BTA-2 available separately. Added Production Value Make your podcast sound professional by triggering sound effects, intro music, jingles, pre-recorded interviews and more, with nine multi-colored sound pads. Choose from 13 pre-loaded sounds or load your own. Create up to four banks of sounds for a total of 36 sound clips at your fingertips. Outputs For Every Occasion The P8 features six independent headphone outputs, each with individual volume control. For professional playback, the P8’s main outputs allow you to connect your studio monitors. Editing Options With the P8’s onboard editing, easily trim, split and fade audio clips to produce a finished episode. You can also transfer track files to your computer for a final mix. Take Your Studio With You When recording outside the studio, the P8 provides up to two hours of recording with four AA batteries, or connect a USB power supply for extended use. Audio Interface A USB-C port allows the PodTrak P8 to function as an audio interface when connected to a computer for recording and live streaming. What’s in the Box Here’s what you’ll find in the box: PodTrak P8 AD-14 AC Adapter Quick Guide Features · Full-colour LCD touchscreen display · Record up to 13 tracks simultaneously · Six mic inputs with XLR connectors and optional phantom power · Individual volume sliders, mute buttons and "on air” indicators for each channel · Dedicated channel for recording phone interviews · Optional BTA-2 Bluetooth enables wireless call recording · Mix-Minus function automatically prevents echo and feedback from call audio · Nine assignable Sound Pads with four banks · 13 pre-loaded sounds including applause, laugh track and more · Six headphone outputs with individual volume controls let everyone hear clearly · Onboard editing · 13-input, 2-output USB audio interface · Class-compliant mode for iOS compatibility · Battery power provides up to two hours of use with four AA batteries · Records directly to SD, SDHC and SDXC cards up to 512GB · Up to 16-bit /44.1kHz audio in BWF-compliant WAV or a variety of MP3 formats Specs INPUTS & OUTPUTS NUMBER OF INPUT CHANNELS: Mic inputs: 6 (mono) Smartphone input: 1 (stereo) NUMBER OF OUTPUT CHANNELS: 2 (6 headphones and L/R speaker outputs) CONNECTORS MIC: Type XLR jacks (2: HOT) Input gain 0 + 70 dB Input impedance XLR：3 kΩ Maximum input level +5 dBu (@0dBFS) Phantom power +48 V SMARTPHONE CONNECTION JACK: Type TRRS mini jack (4 contacts, TIP: L, RING 1: R, RING 2: GND, SLEEVE: MIC) Input impedance 3 kΩ Maximum input level +2.5 dBu USB: USB Type-C (audio interface and mass storage functions). • Use a USB cable that supports data transfer. USB bus power is supported. HEADPHONES: Type 3.5mm stereo mini Maximum output level 20 mW + 20 mW @32 Ω Output impedance 27 Ω SPEAKER OUTPUT: Type TRS jacks (balanced) Maximum output level +5.5 dBu Output impedance 320 Ω AC ADAPTER Power supply connector for AD-14 AUDIO INTERFACE Audio interface 44.1 kHz、16-bit、6 in / 2 out SYSTEM REQUIREMENTS FOR AUDIO INTERFACE MODE Windows OS: Windows® 10 Version 1703 ~ 11 (32bit, 64bit) CPU: Intel® Core i3 or faster* USB: USB 3.0 / 2.0** * Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD. ** Only USB host controllers with Intel Chipsets are supported. Operation is not guaranteed when used with USB hubs or expansion cards. Mac OS： macOS 10.13 ~ 11 CPU: Intel® Core i3 or faster USB: USB 3.0/USB 2.0* * Operation is not guaranteed when used with USB hubs or expansion cards. iPhone / iPad OS： iOS 12 ~ 14 * Apple Lightning-to-USB Camera Adapter required. Android OS： Android OS 7 / 8 / 9 / 10 * Please refer to the compatible android device list. Format WAV 44.1kHz, 16-bit, mono/stereo Recording media 4–32 GB cards compatible with the SDHC specification (class 10 or higher) 64–512 GB cards compatible with the SDXC specification (class 10 or higher) Frequency response -1.0 dB: 20 Hz ～ 20 kHz @44.1 kHz Equivalent input noise EIN -124 dBu (IHF-A) @+70 dB, 150 Ω input Display 4.3" (480×272) full-color touchscreen LCD Power supply 4 AA batteries (alkaline, lithium, or rechargeable NiMH) AC adapter (ZOOM AD-14): DC 5 V/1 A (supports USB bus power) Estimated continuous operation time using batteries Recording 44.1kHz/16-bit/4ch audio to SD card (when +48 V is OFF and headphone impedance is 32 Ω)Alkaline batteries: about 2 hoursNiMH batteries (1900 mAh): about 3.5 hoursLithium batteries: about 6.5 hours• The above values are approximate. Power consumption 5 W External dimensions 295 mm (W) × 248 mm (D) × 61 mm (H) Weight (unit only) 1.43 kg
Copyright © 2024 BC Wholesalers
