Adding to our line of conductor stands, the SM7312W offers an oversized solid wood bookplate with a Rosewood finish, which will accommodate standard and oversized sheet music. The angle adjustment tension system makes for easy removal from the upper shaft. The stand also features a folding tripod base for convenient storage and travel, a high impact plastic leg housing, friction locking knobs, leg support straps and non-slip rubber feet. Features: Oversized 13.5" x 22" bookplate with 2" return lip Folding tripod base for convenient storage and travel Tension locking knob adjusts the angle of the bookplate Mid-point clutch adjusts height from 24" - 45" High impact plastic leg housing Tripod folding base for convenient storage and travel Non-slip rubber feet Specifications: Application: Sheet music stand Book Plate: 13.5" x 22" with 2" return lip Height Adjust: 24" - 45" Base Spread: 18" Center Shaft: 1-3/16" Colour: Black with Rosewood bookplate
The strength and versatility of this stand comes from the double clutch disk that allows you to remove and rotate the support arm assembly. The solid steel double stamped 3" disk allows for a secure locking position every time! The A-Frame base with 1" square tubing construction will adjust its floor spread in order for you to get the most support under your amp. Ridged end caps keep all metal surfaces off the ground and act as a shock absorber. Applications: Stage/studio amplifiers and monitors Weight Capacity: 90 lbs. Arm Width: 12" Arm Depth: 11" Base Spread: 17" Construction: All-Steel Colour: Black Powder Coat Finish
Our strongest A-Frame features heavy-duty 1" square tubing, velveteen rubber and a "uni-construction" design, meaning that there are no parts to lose. It holds both acoustic and electric guitars as well as desktop mixers and combo amps. No more need to own multiple stands when our patented stepped yoke design can hold it all! The unique shape also allows this stand to nest together with others when not in use. Applications: Single Guitar Stand Padding: Velveteen Rubber Tubing: 1 x 1" Square Colour: Black Powder Coat Finish
Fire up a pedalboard anywhere using our PS1000 Rechargeable Pedal Power Bank. While this power bank eliminates the inconvenience of running an extension cord or finding an outlet near the front of a stage, it also provides the freedom to use pedals with a battery-powered amp outdoors. Plus, this power bank avoids the buzz and hum caused by grounding issues in a venue or home. Several pedals or an entire small pedalboard can be powered using this power bank with the included daisy chains-no need for individual adapters. The battery-life indicator takes the guesswork out of determining how much power remains and the built-in flashlight makes it easier to navigate a candlelit venue or the woods around a campfire. FEATURES: No more searching for an outlet - this on-the-go power bank will power your pedals, phone, and other electronic devices anywhere Two outputs power four pedals with use of two included dual power cables (Note: Larger daisy chain cables, like our PSA800 can also be used to power even more pedals, up to 1.2A per output, although this may affect battery life) Small footprint can be mounted just about anywhere, even under your board LED battery life indicator Built-in flashlight to assist in set up/tear down in even the dimmest of venues Battery life will vary depending on total current draw being used. At maximum current draw: 6 Hours (1A output), 3 hours (2A output), 1 hour (simultaneous outputs), although most applications will use less than maximum power consumption, therefore, increasing battery life SPECIFICATIONS: Application: On-the-go pedal power supply Recharging Voltage: 5V (micro USB cable included) Battery Life: Battery life will vary depending on total current draw being used. At maximum current draw: 6 Hours (1 x 9V output), 3 hours (2 x 9V outputs), 1 hour (2 x 9V outputs + 5V output). Most applications will use less than maximum power consumption, therefore, increasing battery life Full Recharging Time: 5 Hours Outputs: (2) 9V Outputs (center negative), (1) 5V USB 9V Output Current: 1.2A 5V Output Current: 2A LED Flashlight: 1 Power Capacity: 10,000 MAH/3.7V Li-battery Consumption Under Ready Mode: 120uA Power Consumption in Standby Mode: 120uA Dimensions: 5.8" x 2.6" x 0.7" Weight: 0.5 lbs. Includes: Power bank, micro USB cable, (2) dual pedal power cables Colour: Black
The DB500 Direct Box transforms any high-impedance 1/4" source into a low-impedance (XLR) signal ready to be sent long distances to a mixing board or recording console. Its passive design features a high quality transformer, ground lift switch, and does not require batteries or phantom power. Perfect for bass/acoustic guitar, keyboards, and DJ equipment. Single channel, passive direct box Transform any high-impedence ¼” source into a low-impedence (XLR) signal High-quality transformer Ground lift switch Input Impedence: 50K ohms Output Impedence: 80 ohms Frequency Response: 10-40kHz Construction: All metal Dimensions: (w)4.75 x (h)1.5" x (d)3” Weight: .97 lbs
Many of today's musicians like things simple and affordable. That's why we continue to offer this popular Single X with it's classic bullet nose pull knob and upgraded, stronger 1" square tubing. Specifications: Applications: Small Format Keyboards Weight Capacity: 90 lbs. Height Adj.: 27" - 38" Tubing: 1" Base Spread: 11" - 31" Arm Depth: 13.25" Construction: Bolted Colour: Black Powder Coat Finish
The tablet and cell holders, each of which boast protective padding at all contact points, adjust from 8" to 12" in height to 3.5" in width and 2.5"H x 4"W respectively. Meanwhile, the assembly adapter provides 180 degrees of tilt with a full 360 degree rotation and accepts any standard 5/8" - 27 threaded mic stand, or, with the included clamp, attaches directly to any .75" to 1" stand or desktop Features: Adjusting from 8" to 12" High and 3 1/2" to 9 1/2" Wide the TCM1500 accomodates vast array of tablet sizes including iPad Pro and Microsoft Surface Lightweight, less than 1 lb, yet made of strong, durable plastic with soft protective padding at contact points Assembly adapter allows holder 180 degree tilt and 360 degree rotation Includes a battery/cell phone holder that adjusts from 2.5" to 4" Specifications: Application: Tablet holder Dimensions: 8" - 12" high x 3.5" x 9.5" wide Rotation: 360 degrees Cell Holder: 2.5" - 4" Clamp: 0.75" - 1" Colour: Black
On Stage Tenor Ukulele Case features shaped wood hard shell with Black Vinyl exterior, Black plush lining interior and Gold Hardware.
Getting your amp off the floor and tilted improves tour mix. This new Tiltback is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 5 tilt positions that allow for optimal sound. The fold-and-go OSRS7500 is perfect for the road and it even includes a 5/8" threaded end allowing musicians to add a mic or boom. Both the black velveteen rubber amp holders and foam padded collar that slides along the upper shaft protects the amp from scratches and dings. Applications: Stage/studio amplifiers and monitors Weight Capacity: 100 lbs. Height Adj.: 8"- 10" (support arm height above floor) Back Bumper Height Adj.: 19"- 36" Mic Mount Height Adj.: 23" Support Arm Lengths: 7.32" Angle Adj.: 95 degrees -110 degrees Folded Dimensions: 5" x 4.5" x 26.5" Colour: Black Powder Coat Finish
Copyright © 2025 BC Wholesalers
