Fingerboard Gluing Clamp. Flexible traction clamp. Maximum clamping tension an impressive 1000N. Ideal for gluing fingerboards or any other objects from 1.2 to 10cm in diameter. Can be attached together in series.
Set of 6 Glue up Clamps for assembling Violins or Viola's. Features Laminated wood jaws lined with rubber cork plates, comfortable polished boxwood handles, stainless steel spindles and bushings. Set includes two clamps for each of upper & loxer bouts and two clamps for centre section. Maximum Jaw opening 57mm.
The Grobet Swiss Round File Cut 0 = Course, 4mm/150mm are designed for working steel, but they are equally suitable for fine working of wood, aluminum, brass and hard plastics. Hardened to 64-65 HRC. Swiss Made. Cut 0 Cut Length 150mm Cross Section 4mm
The Grobet Swiss Round File Cut 1, 1.5mm/75mm are designed for working steel, but they are equally suitable for fine working of wood, aluminum, brass and hard plastics. Hardened to 64-65 HRC. Swiss Made. Cut 1 Cut Length 75mm Cross Section 1.5mm
The Herdim Standard Peg Shaper for Small Violins have brass bodies are fitted with double-sided blades which display high cutting performance and excellent edge life. Re-sharpening the blades is not recommended due to the different hardening of the cutting edges. The soft plastic case provides a comfortable, non-slip grip. All peg shapers come with instructions for use and a hexagonal key for adjusting the blade. Made in Germany. Taper 1:30 Violin Small Working Length 50mm
The Herdim Standard Peg Shaper for Viola and 3/4 & 4/4 Violins have brass bodies are fitted with double-sided blades which display high cutting performance and excellent edge life. Re-sharpening the blades is not recommended due to the different hardening of the cutting edges. The soft plastic case provides a comfortable, non-slip grip. All peg shapers come with instructions for use and a hexagonal key for adjusting the blade. Made in Germany. Taper 1:30 Violin/Viola Standard Working Length 50mm
For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles. Jaw Opening 50mm. Made in Germany.
Practical tools for exchanging, adjusting and fitting bridges. Designed to lift the tensioned strings of the existing bridge, allowing work to be done without risk of dropping the soundpost. The string lifter simultaneously marks the exact position of the new bridge. The top piece is serrated to match any string configuration. The violin and cello models are made of indestructible fiber-reinforced plastic lined with soft plastic to protect the varnish. The bass model is made of sturdy, alloyed aluminum with corklined legs. The top-piece of the bass model is guided along two hardened steel rods to guarantee precise function and high resistance to wear. Height: 30 – 44 mm
The finest screw clamps available for assembling and repairing sensitive antique instruments as well as assembling new instruments. The clamping pads apply pressure directly over the instrument's ribs to prevent damage to the edges of the top and back. The clamps can be set with an accuracy which significantly reduces clamping pressure compared to conventional clamps. The toxin-free plastic repels glue, is resistant to wear and flexible to prevent marking the surfaces of the instrument. The pads slide along grooves in the length of the spindles to allow quick adjustment of the clamp. The reversible upper pads allow the clamps to be also used for gluing the ribs to the back of the instrument. Polyurethane clamping pads with brass-reinforced bushings. Gunmetal-finished spindles with quick-acting brass thumbscrews for easy adjustment. 30 - 60mm Jaw Opening Red for Corners Made in Germany
Copyright © 2024 BC Wholesalers
