Piezo pickups may be crossfaded between bridge pickup and transducer pickup (standard). Comes complete with piezo volume control and a variable super high-grade condenser microphone. Made in Germany. No drilling holes - simply plug in. Installation on or inside the guitar body. Easy battery change. Effortless battery replacement and low power consumption thanks to 3-volt technology. Microphone volume control and frequency adjustment. Endpin with switch, cable and plug.
Exact replacement machine heads for Fender guitars with original dimensions in tried-and-tested Schaller quality. "Original look and specs with cutting-edge Schaller technology" Specifications: 6 in-line / set of 6 1:14 ratio precise original specs maximum precision perfect look 100% Schaller quality 100% made in Germany
Exact replacement machine heads for Fender guitars with original dimensions in tried-and-tested Schaller quality. "Original look and specs with cutting-edge Schaller technology" Made in Germany. Item Number 10560220 Specifications: 6 in-line / set of 6 1:16 ratio premium-quality chrome -plated precise original specs maximum precision perfect look 100% Schaller quality 100% made in Germany staggered string posts
Flagship - Sounds you never thought possible With this new and groundbreaking Class A preamp your music has never sounded better. Clear smooth highs, soulful mids and bodacious bass combined with an impressive dynamic range of 115dB will lead your inspiration to new levels.With a true bandwidth of 1Hz to 20kHz at +/- 0 dB our state-of-the-art FlagShip circuitry provides unprecedented signal fidelity along with exceptional operational convenience.And because of FlagShip‘s leading-edge Rail to Rail technology a single 9V alcaline battery will provide you with 1.000+ hours of play time.Enjoy a self-sensing circuitry automatically switching in mono- or stereo-operation respectively by sensing which kind of chord you plugged in. In addition the FlagShip preamp offers an ultra-silent operation with a signal to noise-ratio of -115dB and a noise floor of just 20 dBV while Schaller‘s own FlagShip gold-contact 5-way Megaswitch lets you choose from a vast variety of piezo and magnetic switching-options and –combinations never seen in any preamp before.SoundInnovationPerformance Suitable for all piezo-pickup systems plug & play solderfree connections5-Way Megaswitch Switching Options in Mono- and in Stereo-Mode:Mono and stereo positions 2 through 5 feature identical controls and functions allowing for a transparent layout and easy handling. Pos 1 Mono and Pos 1 Stereo feature special utility settings.Pos 1 mono: piezo raw-mode (1) / stereo: mute, silent-mode (2)Pos 2 piezo into FlagShip preampPos 3 magnetic pickups and piezo signal into FlagShip preampPos 4 magnetic pickups into FlagShip preamp (buffered)Pos 5 magnetic pickups pure and unaltered (hardwire-bypass)(1) for reference purposes use this option to hear the raw piezo signal(2) when playing live use this option for silently changing instruments3-Way rotary switch Switching Options in Mono- and Stereo-Mode:The mono and stereo switching positions 2, 3 and 5 feature identical controls and switching functions for user-friendly layout.MONOPos 2 acoustic activePos 3 magnetic + acoustic activePos 5 magnetic bypassSTEREOPos 2 acoustic activePos 3 magnetic + acoustic activePos 5 magnetic bypassFeatures, Specifications & Benefits Advanced class A circuitry for sweet,transparent sound Compact, robust and perfectly shielded Attractive and protective casing with see-through window Original Schaller gold-contact 5-way Megaswitch for outstanding signal flow and switching options Stereo/mono selfsensing and –adjusting circuitry (no extra switch required) Rail to Rail energy effi ciency technology Reverse polarity and static discharge circuit protection Automatic power shut-off when cable is disconnected Plug-in contacts for easy solderfree installation 1000+ hours of playtime on a single 9V alcaline battery True 1Hz - 20kHz bandwidth at +/-0 dB Ultra quiet -115 dB signal to noise-ratio Input impedance: magnetic 3 megohms / piezo 1 megohm Output impedance: 5 megohms All parts and components 100% made in Germany Comes complete with 5-way Megaswitch, mono-/stereo-jack, Schaller control potentiometer (22K-Ohm), wiring and plugs Weight in gramms: 49 Size in mm: 89 x 24 x 7(all specifications subject to change without notice)Volume piezo bridge and passive pickup with variable adjustment.Supplied with a stereo jack socket. This allows the piezo and pickup signal to be separated using a stereo splitter y-cable and then connected to two different amps or channels.Caution: When a connection is made to pickups that are already live, the output signal increases automatically!A 9 volt battery can be used as a general power supply.Please note that piezo bridges are not earthed.A comprehensive instruction and installation guide with additional detailed information and illustrations are available to download on our webseite under products/product help/flagship. Quick 10 Step Guide to FlagShip01. signal to noise ratioratio describing the level of signal to the level of background noise in dB (higher is better)02. dynamic rangemeasured gap from the loudest possible undistorted signal amplitude to the most quiet one in dB (higher is better)03. bandwidthspan between the lowest (here 1 Hz) and the highest frequency (here 20 kHz) the preamp can linearly (meaning without distortion) amplify or reproduce04. noise floorsignal created from the sum of all noise sources (lower is better)05. hardwire-bypass or true bypasspure and unaltered guitar signal by way of bypassing any form of active signal-processing06. reverse polarity protectioncircuitry protecting the electronic components from interchanging plus and minus polarity (here: protection from interchanging the +poles and -poles of the battery)07. static discharge protectioncircuitry protecting the electronic components from an electrical voltage spark or 'spike'08. piezo pickuppiezo-electrical signal created by transforming pressure/vibration into output voltage09. magnetic pickupmagnetic pickup signal is created by transforming string motion and magnetic resistance into output voltage10. buffered signalhigh impedance signal transformed into a low impedance signal, therefore unaffected by high capacitance of excessive signal-cable and/or patch-cable lengthsAnother significant benefit of switching pos 4. is the buffered signal, i.e. the conversion of the high capacity passive pickup signal into a low capacity active pickup signal. This prevents sound degradation commonly associated with running extended cable lengths or using inferiour cable qualities. Your magnetic pickup signal will remain strong, clear and detailed even on the most unfavourable conditions.(see: Quick 10 Step Guide to FlagShip) Schaller Flagship preamp – Stereo / Mono OperationFor mono and for stereo use the Flagship preamp features an advanced mono / stereo selfsensing output stage. The Flagship preamp senses whether a mono 1/4“ or a stereo 1/4“ plug is inserted and switches into the appropriate mode automatically. Not only does this prevent misuse so commonly known from mono/stereo toggle switches. It also allows for just one output jack (see stereo jack enclosed) in your guitar to operate the Flagship to its fullest potential.In mono mode the sound of the magnetic pickups is mixed with the sound of the piezo pickups within the preamp. We recommend using a regular 1/4“ plug guitar cable. Please refer to the Flagship manual for all dedicated sound options in this mode.In stereo mode the sound of the magnetic pickups and the sound of the piezo pickups are sent seperately to the stereo output jack. Please refer to the Flagship manual for all dedicated sound options in this mode.We recommend two ways for routing the signals:1. Using a stereo cable with two 1/4“ plugs for routing the magnetic and piezo signal seperately to a mixing console’s stereo input.2. Using a Y-cable with two 1/4“ mono plugs and one 1/4“ stereo plug for splitting your signal between a guitar amp for the magnetic pickups and a PA or acoustic amp for the piezo signal.The stereo and mono plugs should be connected as follows:Tip of stereo plug goes to tip of mono plug left.Ring of stereo plug goes to tip of mono plug right.Sleeve of stereo plug goes to sleeve of mono plug left.Sleeve of stereo plug goes to sleeve of mono plug right.Please note that by connecting the grounds of two amps or an amp with a PA a low-frequency ground hum may occur. This is an inherent problem caused by ground loops and in no way a fault within the Flagship preamp.
Flagship - Sounds you never thought possible With this new and groundbreaking Class A preamp your music has never sounded better. Clear smooth highs, soulful mids and bodacious bass combined with an impressive dynamic range of 115dB will lead your inspiration to new levels.With a true bandwidth of 1Hz to 20kHz at +/- 0 dB our state-of-the-art FlagShip circuitry provides unprecedented signal fidelity along with exceptional operational convenience.And because of FlagShip‘s leading-edge Rail to Rail technology a single 9V alcaline battery will provide you with 1.000+ hours of play time.Enjoy a self-sensing circuitry automatically switching in mono- or stereo-operation respectively by sensing which kind of chord you plugged in. In addition the FlagShip preamp offers an ultra-silent operation with a signal to noise-ratio of -115dB and a noise floor of just 20 dBV while Schaller‘s own FlagShip gold-contact 5-way Megaswitch lets you choose from a vast variety of piezo and magnetic switching-options and –combinations never seen in any preamp before.SoundInnovationPerformance Suitable for all piezo-pickup systems plug & play solderfree connections5-Way Megaswitch Switching Options in Mono- and in Stereo-Mode:Mono and stereo positions 2 through 5 feature identical controls and functions allowing for a transparent layout and easy handling. Pos 1 Mono and Pos 1 Stereo feature special utility settings.Pos 1 mono: piezo raw-mode (1) / stereo: mute, silent-mode (2)Pos 2 piezo into FlagShip preampPos 3 magnetic pickups and piezo signal into FlagShip preampPos 4 magnetic pickups into FlagShip preamp (buffered)Pos 5 magnetic pickups pure and unaltered (hardwire-bypass)(1) for reference purposes use this option to hear the raw piezo signal(2) when playing live use this option for silently changing instruments3-Way rotary switch Switching Options in Mono- and Stereo-Mode:The mono and stereo switching positions 2, 3 and 5 feature identical controls and switching functions for user-friendly layout.MONOPos 2 acoustic activePos 3 magnetic + acoustic activePos 5 magnetic bypassSTEREOPos 2 acoustic activePos 3 magnetic + acoustic activePos 5 magnetic bypassFeatures, Specifications & Benefits Advanced class A circuitry for sweet,transparent sound Compact, robust and perfectly shielded Attractive and protective casing with see-through window Original Schaller gold-contact 5-way Megaswitch for outstanding signal flow and switching options Stereo/mono selfsensing and –adjusting circuitry (no extra switch required) Rail to Rail energy effi ciency technology Reverse polarity and static discharge circuit protection Automatic power shut-off when cable is disconnected Plug-in contacts for easy solderfree installation 1000+ hours of playtime on a single 9V alcaline battery True 1Hz - 20kHz bandwidth at +/-0 dB Ultra quiet -115 dB signal to noise-ratio Input impedance: magnetic 3 megohms / piezo 1 megohm Output impedance: 5 megohms All parts and components 100% made in Germany Comes complete with 5-way Megaswitch, mono-/stereo-jack, Schaller control potentiometer (22K-Ohm), wiring and plugs Weight in gramms: 49 Size in mm: 89 x 24 x 7(all specifications subject to change without notice)Volume piezo bridge and passive pickup with variable adjustment.Supplied with a stereo jack socket. This allows the piezo and pickup signal to be separated using a stereo splitter y-cable and then connected to two different amps or channels.Caution: When a connection is made to pickups that are already live, the output signal increases automatically!A 9 volt battery can be used as a general power supply.Please note that piezo bridges are not earthed.A comprehensive instruction and installation guide with additional detailed information and illustrations are available to download on our webseite under products/product help/flagship. Quick 10 Step Guide to FlagShip01. signal to noise ratioratio describing the level of signal to the level of background noise in dB (higher is better)02. dynamic rangemeasured gap from the loudest possible undistorted signal amplitude to the most quiet one in dB (higher is better)03. bandwidthspan between the lowest (here 1 Hz) and the highest frequency (here 20 kHz) the preamp can linearly (meaning without distortion) amplify or reproduce04. noise floorsignal created from the sum of all noise sources (lower is better)05. hardwire-bypass or true bypasspure and unaltered guitar signal by way of bypassing any form of active signal-processing06. reverse polarity protectioncircuitry protecting the electronic components from interchanging plus and minus polarity (here: protection from interchanging the +poles and -poles of the battery)07. static discharge protectioncircuitry protecting the electronic components from an electrical voltage spark or 'spike'08. piezo pickuppiezo-electrical signal created by transforming pressure/vibration into output voltage09. magnetic pickupmagnetic pickup signal is created by transforming string motion and magnetic resistance into output voltage10. buffered signalhigh impedance signal transformed into a low impedance signal, therefore unaffected by high capacitance of excessive signal-cable and/or patch-cable lengthsAnother significant benefit of switching pos 4. is the buffered signal, i.e. the conversion of the high capacity passive pickup signal into a low capacity active pickup signal. This prevents sound degradation commonly associated with running extended cable lengths or using inferiour cable qualities. Your magnetic pickup signal will remain strong, clear and detailed even on the most unfavourable conditions.(see: Quick 10 Step Guide to FlagShip) Schaller Flagship preamp – Stereo / Mono OperationFor mono and for stereo use the Flagship preamp features an advanced mono / stereo selfsensing output stage. The Flagship preamp senses whether a mono 1/4“ or a stereo 1/4“ plug is inserted and switches into the appropriate mode automatically. Not only does this prevent misuse so commonly known from mono/stereo toggle switches. It also allows for just one output jack (see stereo jack enclosed) in your guitar to operate the Flagship to its fullest potential.In mono mode the sound of the magnetic pickups is mixed with the sound of the piezo pickups within the preamp. We recommend using a regular 1/4“ plug guitar cable. Please refer to the Flagship manual for all dedicated sound options in this mode.In stereo mode the sound of the magnetic pickups and the sound of the piezo pickups are sent seperately to the stereo output jack. Please refer to the Flagship manual for all dedicated sound options in this mode.We recommend two ways for routing the signals:1. Using a stereo cable with two 1/4“ plugs for routing the magnetic and piezo signal seperately to a mixing console’s stereo input.2. Using a Y-cable with two 1/4“ mono plugs and one 1/4“ stereo plug for splitting your signal between a guitar amp for the magnetic pickups and a PA or acoustic amp for the piezo signal.The stereo and mono plugs should be connected as follows:Tip of stereo plug goes to tip of mono plug left.Ring of stereo plug goes to tip of mono plug right.Sleeve of stereo plug goes to sleeve of mono plug left.Sleeve of stereo plug goes to sleeve of mono plug right.Please note that by connecting the grounds of two amps or an amp with a PA a low-frequency ground hum may occur. This is an inherent problem caused by ground loops and in no way a fault within the Flagship preamp.
Base Plate for Schaller Floyd Rose Guitar Tremolo Unit. Chrome 20280200. Made in Germany
Base Plate for Schaller Floyd Rose Guitar Tremolo Unit. Black 20280400. Made in Germany
Pivot Knife Edge Blade Block for Schaller Floyd Rose Guitar Tremolo Unit. Made in Germany
Pivot Stud and Insert for Schaller Floyd Rose Guitar Tremolo Unit. Set of 2 Black. 20100400. Made in Germany
Copyright © 2024 BC Wholesalers
