The Leem SPA-10 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with SD card slot and USB input SPECIFICATIONS: Freq.Response: 70Hz 20kHz (±3dB) Sensitivity (1M/1W): 93dB Woofer: 10" MF/LF 1.5" voice coil Driver: 1" exit-1.0" compression driver Crossover: 3.0kHz Max SPL: 115dB Input Connector: XLR / JACK / RCA Rated Power (@4ohm): 65W Max. Power (@4ohm): 120W Dimension (W x H x D): 365 x 565 x 300mm Weight: 7.8Kg
The Leem SPA-12 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with Bluetooth, SD card slot and USB input. SPECIFICATIONS: Type: 2-Way Active PA Speaker Freq.Response: 60Hz 20kHz (±3dB) Sensitivity (1M/1W): 94dB Woofer: 12" MF/LF 2.0" voice coil Driver: 1" exit-1.0" compression driver Crossover: 2.8kHz Max SPL: 120dB Bluetooth Module: 4.2 Input Connector: XLR / JACK / RCA Rated Power (@4ohm): 100W Max. Power (@4ohm): 200W Dimension (W x H x D): 435 x 670 x 400mm Weight: 11Kg
The Leem SPA-15 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with Bluetooth, SD card slot and USB input. SPECIFICATIONS: Type: 2-Way Active PA Speaker Freq.Response: 50Hz 20kHz (±3dB) Sensitivity (1M/1W): 95dB Woofer: 15" MF/LF 2.0" voice coil Driver: 1" exit-1.0" compression driver Crossover: 2.5kHz Max SPL: 120dB Bluetooth Module: 4.2 Input Connector: XLR / JACK / RCA Rated Power (@4ohm): 100W Max. Power (@4ohm): 200W Dimension (W x H x D): 485 x 755 x 400mm Weight: 14.2Kg
The Leem SPA-8 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with SD card slot and USB input. SPECIFICATIONS: Type: 2-Way Active PA Speaker Freq.Response: 75Hz 20kHz (±3dB) Sensitivity (1M/1W): 92dB Woofer: 8" MF/LF 1.5" voice coil Driver: 1" exit-1.0" compression driver Crossover: 3.5kHz Max SPL: 110dB Input Connector: XLR / JACK / RCA Rated Power (@8ohm): 100W Dimension (W x H x D): 305 x 455 x 255mm Weight: 6.3Kg
Approach your next event with something big, bold and Bluetooth-compatible—Thump GO. It’s a portable battery-powered Bluetooth loudspeaker that delivers full, dynamic sound for any application. TAKE YOUR STAGE ANYWHERE Set the stage, wherever you want it to be. Bring professional live sound reinforcement to small concerts, corporate events, assemblies, weddings, parties and more. Mackie Thump GO puts powerful sound processing and wireless control in your hands, whether you’re holding a guitar, wired or wireless microphone or DJ controller. Built-in 2-Channel Mixer Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. Thump GO’s built-in 2-channel mixer has two combo input jacks for easy plug-and-play. Paired with the Thump Connect 2 app, you can dial in your sound and let creativity do the rest. No Power, No Problem The removable lithium-ion battery pack is key to Thump GO’s ultra-portable design. With a single charge, Thump GO can deliver signature “thump” and clarity for 12 hours. Pair a second rechargeable battery for extra long gigs. Sound Great Instantly Thump GO has some pretty powerful audio processing under the hood that you can use to step up your game. Choose from four different application-specific voicing modes to optimize your sound with the push of a button. Duck Duck Shush DJs will especially love this one. Thump GO has an integrated Music Ducking Mode that attenuates the volume level of channel 2 whenever a signal is received on channel 1. Now you can make big announcements like, “Hear how great I sound” without messing with your gain levels on the mixer or your equipment. Squeal-Be-Gone If we really wanted to get rid of feedback, we’d have to rewrite the laws of acoustics, which sounds like an uphill battle, to say the least. Instead, we gave Thump GO a Feedback Eliminator to get rid of that unwanted squeal. Just hit the button and say goodbye to awkward speeches (at least the ear piercing part). Wireless Streaming and Control No DJ equipment? No problem! Easily stream music directly to your Thump GO via Bluetooth. Using the Thump Connect 2 app, you can adjust anything from EQ and Voicing Modes to channel levels and custom presets—all from the center of the dancefloor. Features: Ultra-efficient 200W Class-D amplifier 8” custom high-output woofer and 1” compression driver for clean, punchy sound Removable lithium-ion battery with up to 12 hours of battery life Bluetooth® connectivity for music streaming or linking a second Thump GO Wireless control via the Thump Connect 2 app 2-channel digital mixer with dual XLR / TRS combo inputs and XLR mix output Feedback eliminator to prevent unwanted squeals and rumble 4 application-specific speaker modes—Music, Speech, Monitor and Sub Indoor or outdoor voicing modes Music Ducking Mode automatically lowers channel 2 when channel 1 receives signal Sturdy, lightweight speaker enclosure to withstand heavy use Rugged, powder-coated steel grille
The Peavey Aquarius AQ series speaker enclosures represent the best combination of reliability, performance and value in the market today. Using our 50 plus years of experience and custom components, the AQ series represents an evolution of speaker technology no other company can offer. The AQ15 features a reliable bi-amped power section that provides a total of 1000 Watts of peak available dynamic power with signal compression to prevent audible overload. The analog power amplifiers and linear power supply are coupled with a DSP based crossover and EQ. The EQ presets are accessed via a one-knob selector switch. The AQ15 provides a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. There is a balanced Thru output via a Male XLR. There is an adjustable Level control as well as an LED indicator that lights when the "soft-limiting" compression circuit is activated. The AQ represents an increase in power, both in output and reliability from previous designs while increasing efficiency, using less power to create more output making our products environmentally friendly. Sonically our components are world-class. Our Asymmetrical Quadratic Waveguide horn allows us to direct the existing energy more precisely. This makes our enclosures perform better by getting more output where it's needed in addition to having a cleaner, clearer sound than our competition. Safety is a number one concern; our enclosures are tested and certified for sale all over the world to be safe and reliable in a number of environments. Modern features like Bluetooth audio streaming and the ability to pair another speaker make our speakers convenient as well as being sonically superior. Advanced DSP gave our engineers the ability to design several presets that quickly modify the enclosure's dynamics and EQ for various applications. Efficient, easy to use, modern, reliable, and now with reduced weight, the AQ series is the best value in the business. Dare to compare our enclosures to any in its category and you will find a sonically superior, more reliable, and higher output enclosure. FEATURES: Two-way bi-amplified analog amp powered speaker system 15" heavy-duty woofer DX14 compression driver, with 1.4 inch titanium diaphragm 670 watts peak dynamic woofer power, 330 watts peak dynamic tweeter power Bluetooth streaming and pairing are supported - 33ft / 10m bluetooth range or improved with no line of sight obstructions - AQ12 speakers can also pair with AQ15 speakers DSP processing is 56 bit double-precision DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components Dynamic bass boost function Fan cooled for maximum reliability Peavey Designed Quadratic Throat Waveguide technology, 110 by 80 degree coverage Input is via a combo female XLR and 1/4" TRS phone jack with balanced input OR a Bluetooth signal can be streamed to the speaker system. Mic/Line switch to accommodate a wide range of input signals Thru/Mix output is via a male XLR jack Multiple Factory Preset EQ settings for the DSP crossover system Rugged plastic injection-molded trapezoidal enclosure Cabinet has dual rear corner angled sides for floor monitor use. Full-coverage perforated steel grille, with powder coat finish Pole mount molded-in for 1 3/8" diameter poles Weight Unpacked: 33.3 lb (15.1 kg) Weight Packed: 40.3 lb (18.3 kg) Width Packed: 16.38" (41.59 cm) Height Packed: 16.13" (40.96 cm) Depth Packed: 28.25" (71.76 cm) APPLICATIONS: The Peavey AQ15 has a variety of applications such as sound reinforcement, public address, side fill system, karaoke or musical playback. A typical signal source for the line-Gain inputs of the AQ15 would be a sound reinforcement mixing console (mixer) or the output from a CD player, MP3 player or tape deck. A dynamic microphone can be connected directly via the XLR input and used when the Mic/Line switch in placed into the "Mic" position as well. The AQ15 is a two-way sound reinforcement system based on a heavy-duty 15" woofer and a DX14 titanium diaphragm dynamic compression driver mounted on a 110 by 80 degree coverage Quadratic Throat Waveguide. It's contemporary appearance coupled with exceptional performance offer a highly desirable combination. The light yet durable injection-molded plastic enclosure with molded-in stand mount cup eases portable use for live music or PA sound. The trapezoidal cabinet has three handles for ease of portability, and two extra angled sections on either side to allow use as a floor monitor. A full length black powder coated perforated steel grille provides system protection and a professional appearance. The heavy-duty 15" woofer has a warm punchy sound for plenty of bass. The DX14 compression driver tweeter is coupled to a Quadratic Throat constant directivity waveguide, an original Peavey design, with smooth, even response, low distortion and good high frequency dispersion. Advanced Digital Signal Processing (A.D.S.P.) provides the crossover function, driver limiting, as well as the driver EQ to enable the speaker system to provide an accurate and neutral sound for any type of music. The DSP processing uses 56 bit double-precision to insure accurate and transparent sound processing, and the input/output sections use a 48 kHz sampling rate at 24 bits for maximum fidelity. Low-jitter clocking and professional grade components insure the sound quality is superb. An extremely simple system of user selected Presets is implemented in the speaker system's DSP computing core, and accessible via the rotary selector knob. A total of 6 presets is available, covering the most common applications for this genre of speaker system. The AQ15 speaker system power amplifiers providing the bi-amplification are low-distortion reliable fan-cooled units providing a total of 1000W peak available dynamic power for the system. There is 670W peak available dynamic power for the woofer, and 330W peak available dynamic power for the tweeter. The power supply for both amps is a switching type for low weight coupled with low cost. Both amplifiers feature sophisticated signal compression, which virtually eliminates audible power amplifier clipping. Cooling is provided via a low-noise fan, for reliable operation under any conditions. A built-in dynamic bass boost function provides the maximum amount of bass in such a small package. Input is via a combo female XLR and 1/4" TRS phone jack with balanced input to the DSP preamp/EQ electronics, and a Level control. A Mic/Line switch allows for use of a microphone via the extra gain available when in the "Mic" position. A Thru output has a male XLR jack. This output allows linking of additional speaker systems, or feed of the signal to a powered subwoofer, etc. Bluetooth operation's supported include streaming and device pairing, and a separate Level control is provided for the Bluetooth signal level adjustment. Bluetooth Range Information This is a Class 2 Bluetooth device, and as such is designed to have a typical maximum range of approximately 10m (33 feet). However, any intervening materials, such as walls, shelves, screens, people, or most anything made of a substantial amount of metal, can reduce and affect that range.
The DM 115 Sub features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also feature a 15" heavy-duty woofer with a 3" voice coil. The DM 115 Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a full-range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Features: Vented bass powered subwoofer enclosures 15" premium heavy-duty woofer Power amp has forced air cooling for maximum reliability Internal line level low-pass/high-pass crossover network Fully adjustable Kosmos® C for increased bass impact Polarity switch for polarity reversal of subwoofer Full-coverage heavy-duty perforated steel grill Steel handles XLR/1/4" combo jack input Compact dimensions for a 15" woofer based sub Two high-pass XLR outputs, and one full-range thru XLR output Threaded pole mount with speaker pole included 800 watts peak available power Ground lift switch for lifting cable shield from ground Weight Packed: 90.98 lb (41.27 kg) Width Packed: 27.25" (69.22 cm) Height Packed: 28" (71.12 cm) Depth Packed: 21.5" (54.61 cm)
The DM 118 Sub features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also features an 18" heavy-duty woofer with a 3" voice coil. The DM 118 Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a full-range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Features: Vented bass powered subwoofer enclosures Power amp has forced air cooling for maximum reliability Internal line level low-pass/high-pass crossover network XLR/1/4" combo jack input Two high-pass XLR outputs, and one full-range thru XLR output Ground lift switch for lifting cable shield from ground Full-coverage heavy-duty perforated steel grill Fully adjustable Kosmos® C for increased bass impact Steel handles Compact dimensions for an 18" woofer based sub 18" premium heavy-duty woofe Threaded pole mount with speaker pole included 800 watts peak available power Large heavy-duty locking caster with damped bearings Polarity switch for polarity reversal of subwoofer Weight Packed: 113.98 lb (51.7 kg) Width Packed: 27.5" (69.85 cm) Height Packed: 31" (78.74 cm) Depth Packed: 24.75" (62.87 cm)
The PVXp™ 12 DSP features a reliable bi-amped power section that provides a total of 830 Watts of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 12" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp™ 12 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector. Features: Two-way bi-amplified analog amp powered speaker system DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components Fan cooled for maximum reliability Peavey Exclusive Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage DSP processing is 64 bit double-precision Input is via a combo female XLR and 1/4" TRS phone jack with balanced input A Mic/Line switch provides for two different gain settings Thru output is via a male XLR jack and 1/4" TRS phone jack Multiple Factory Preset EQ settings Rugged plastic injection-molded trapezoidal enclosure 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power Full-coverage perforated steel grille, with powder coat finish RX™ 14 compression driver, with 1.4 inch titanium diaphragm Pole mount molded-in for 1 3/8" diameter poles 12" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet Top, bottom and right side flying point inserts Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads Weight Unpacked: 42.00 lb (19.05 kg) Weight Packed: 48.00 lb (21.77 kg) Width Packed: 20" (50.8 cm) Height Packed: 26.75" (67.95 cm) Depth Packed: 18.25" (46.36 cm)
Copyright © 2024 BC Wholesalers
