No matter how good your amp is, the speaker cabinet must also be top quality to have a great tone. The Peavey 112 has a premium 12" Blue Marvel® speaker. The back of the cabinet is a closed back configuration. Great quality, great look, great tone and great value! Features: 12" Blue Marvel® Speaker 16 ohms 40 watt RMS Closed Back Mono Input Jack Weight Unpacked: 27.78 lb (12.6 kg) Weight Packed: 31.97 lb (14.5 kg) Width Packed: 21.25" (53.98 cm) Height Packed: 23.62" (59.99 cm) Depth Packed: 14.37" (36.50 cm)
The foundation of the Peavey Aureus 28 digital mixer is professional quality audio in an easy to use package. The 10" multi-touch display allows users to access almost any control with just a couple of taps. Fifty-nine dedicated controls allow access to most critical functions with a single touch, making the Aureus the easiest to use digital mixer to date. No fumbling through endless menus - just touch the feature you want to access and adjust. Quick setup is easy with the Aureus. Packed with presets for channels, EQ, gate, compressor, scenes, and shows, the mix can be up and running in minutes. The mixer also provides the ability to save and store your own presets, scenes, and even an entire mix onto a USB drive. Place a tablet in the onboard dock and use it as a second screen, or use any HTML5 compatible browsers for remote control. This second screen is perfect for monitoring the entire mix while adjusting a specific channel or separate group on the mixer. The Aureus 28 digital mixer contains 28 inputs and 14 outputs with a best-in-class 10" touch display. For ultimate ease of use and workflow, the Aureus 28 has 14 dedicated encoders, 9 motorized faders, and 45 dedicated backlit buttons. Thanks to 16 XLR-1/4", RCA, Bluetooth, and USB inputs, the Aureus can connect to most audio sources. Combine that with 14 outputs, including 10 XLR, USB, and AES digital, and the Aureus will tackle just about any sound reinforcement application. Remote control is available via onboard WIFI. Connect up to 10 devices simultaneously to control any aspect of the mix. By assigning passwords to busses, each musician can have control over their own mix by using any device that can open an HTML5 compatible browser. Access a wide selection of reverb and delay through Peavey's exclusive built-in FX series digital effects, featuring simple and advanced modes. Whether you are mixing in a club, church, conference center, sports field, arena, or any other place requiring professional audio, the Aureus mixer is the perfect solution, providing world-class workflow and audio quality in a compact, easy-to-use format. Features: Channels: 28 inputs x 14 outputs Inputs: 16 x XLR-1/4 Combo Phantom Power: 16 Channels 48V Additional Inputs: Bluetooth, USB A/B Outputs: 10 X XLR, 2 RCA, 6 Digital AUX Sends: 8 Aux Busses / Groups: 8 BUS, 2 MAIN, 4 DCA DATA I/O: WIFI onboard, Ethernet remote Computer Connectivity: Ethernet, WIFI, USB Headphones: 1 X 1/4 Faders: 9 100mm Motorized EQ: 5-band fully parametric Effects: 23 effects in 2 engines Rack Mountable: Optional Mute Groups: 3 programmable Mute Functions: 6 Dedicated controls Bluetooth: Stereo - Long Range Solo Function: With dedicated controls Tablet Holder: Yes
The Backstage emulates the sound, high output, warmth and "push back" of tube amplifiers and includes features such as high and low EQ controls, a 6 inch heavy-duty speaker, switchable TransTube® overdrive, a Aux input for jamming along to your favorite songs and a headphone input for doing so quietly. Guitar Player reviewer Barry Cleveland raves about the tone and value of the Backstage in his March 2004 hands-on product review. "This is easily one of the best-sounding mini amps I've ever heard," he writes. "It delivers a great assortment of tube-like tones and offers excellent dynamic response, all in a pint-sized package and for a very modest price."The key is Peavey's exclusive TransTube technology, which emulates the sound of tube amplifiers without the hassle or cost of dealing with unpredictable tubes. The TransTube preamp tailors the gain level for any amount of drive, from clean to crunch to scream, using a patented approach to emulating 12AX7 tubes and their ability to create even, harmonic distortion. It also mimics the "push back" response of real tube circuitry, which is essential to emulating tube dynamics, distortion and chime. Features: 6 inch custom designed speaker TransTube® preamp with 2 switchable channels Volume and Overdrive controls 2-band EQ Aux input for practice Headphone jack 12 watts (rms) Weight Unpacked: 9.70 lb(4.399 kg) Weight Packed: 11.50 lb(5.216 kg) Width Packed: 9.12"(23.1648 cm) Height Packed: 14.12"(35.8648 cm) Depth Packed: 14"(35.56 cm)
No matter how good your amp is, the speaker cabinet must also be top quality to have a great tone. The Peavey 112-C has 18mm plywood construction and a premium Celestion Vintage 30 speaker. The back of the cabinet is convertible for changing the cabinet to an open back configuration. Rubber feet and metal corners complete the package. Great quality, great look, great tone and great value! Features: Tweed Tolex covering Metal corners 16 ohms Mono Rubber feet Top handles 18mm Plywood construction Convertible open back/closed back One Celestion 12" Vintage 30 speaker 60 watt power handling Weight Unpacked: 33.00 lb(14.969 kg) Weight Packed: 37.80 lb(17.146 kg) Width Packed: 21.5"(54.61 cm) Height Packed: 27.5"(69.85 cm) Depth Packed: 16"(40.64 cm)
Revered by blues, country and rock players alike, Peavey Classic amps span the tonal landscape from vintage to contemporary with ease, and the Classic 20 MH provides that tone in a highly portable package. The all-tube, 20-Watt Classic 20 MH is powered by two EL84 power tubes and 3 12AX7/ECC83 preamp tubes. It has two channels that follow the same gain structure and voicing of the Peavey Classic series amps for pure and versatile tone. The channels share a three-band EQ, lush reverb and an effects loop. The channels, effects loop and reverb are all footswitchable. Peavey's TSI™ tube monitoring alerts players of power tube status, and in the event of a necessary tube replacement, identifies which tube needs to be replaced. Rear panel features such as a Microphone Simulated Direct Interface (MSDI™) with XLR output and USB out, speaker defeat switch and 3 position power attenuator switch make the Classic 20 MH mini head perfect for studio environments. Features: Attenuator switch for 20 watts, 5 watts or 1 watt output power Two EL84 power tubes and three 12AX7/ECC83 preamp tubes Two footswitchable channels with 3-band EQ Footswitchable global volume boost, reverb, and effects loop Footswitch included T.S.I.™ (Tube Status Indication) circuit MSDI™ Output with XLR and ground lift switch USB Output Speaker defeat switch Headphone output. Footswitch included Impedance switch for 16 or 8 ohm cabinets Weight Unpacked: 16.75 lb(7.6 kg) Weight Packed: 20.50 lb(9.3 kg) Width Packed: 13.25"(33.655 cm) Height Packed: 19.375"(49.2125 cm) Depth Packed: 12.375"(31.4325 cm)
Revered by blues, country and rock players alike, these true all-tube amps span the tonal landscape from vintage to contemporary with ease. These amps are drenched in the tone that can only come from the combination of three 12AX7 and four EL84 tubes. Add features like 3-band EQ, footswitchable dual channels, footswitchable boost and reverb and you have one of the most versatile amplifiers on the market. The Classic 30 now ships with the all new Celestion Midnight 60 12" speaker! Classic looks, classic tone, Classic 30! Features: Genuine Spring Reverb with level control Pre- and post-gain controls on lead channel External speaker capability Chrome-plated chassis Classic tweed covering Footswitch included 30 watts (rms) into 16 or 8 ohms 2-channel preamp Footswitch selectable channel switching, reverb and boost Four EL84s and three 12AX7s 12" Celestion Midnight 60 speaker Effects loop Channel and Boost switch uses Peavey part number 03022910 Normal volume control on clean channel Reverb on/off switch uses Peavey part number 03051000 Boost switch 3-band passive EQ (bass, middle, treble) Standby Switch Weight Unpacked: 39.50 lb(17.917 kg) Weight Packed: 46.00 lb(20.865 kg) Width Packed: 19.25"(48.895 cm) Height Packed: 21.5"(54.61 cm)
The DM 115 Sub features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also feature a 15" heavy-duty woofer with a 3" voice coil. The DM 115 Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a full-range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Features: Vented bass powered subwoofer enclosures 15" premium heavy-duty woofer Power amp has forced air cooling for maximum reliability Internal line level low-pass/high-pass crossover network Fully adjustable Kosmos® C for increased bass impact Polarity switch for polarity reversal of subwoofer Full-coverage heavy-duty perforated steel grill Steel handles XLR/1/4" combo jack input Compact dimensions for a 15" woofer based sub Two high-pass XLR outputs, and one full-range thru XLR output Threaded pole mount with speaker pole included 800 watts peak available power Ground lift switch for lifting cable shield from ground Weight Packed: 90.98 lb (41.27 kg) Width Packed: 27.25" (69.22 cm) Height Packed: 28" (71.12 cm) Depth Packed: 21.5" (54.61 cm)
The DM 118 Sub features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also features an 18" heavy-duty woofer with a 3" voice coil. The DM 118 Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a full-range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Features: Vented bass powered subwoofer enclosures Power amp has forced air cooling for maximum reliability Internal line level low-pass/high-pass crossover network XLR/1/4" combo jack input Two high-pass XLR outputs, and one full-range thru XLR output Ground lift switch for lifting cable shield from ground Full-coverage heavy-duty perforated steel grill Fully adjustable Kosmos® C for increased bass impact Steel handles Compact dimensions for an 18" woofer based sub 18" premium heavy-duty woofe Threaded pole mount with speaker pole included 800 watts peak available power Large heavy-duty locking caster with damped bearings Polarity switch for polarity reversal of subwoofer Weight Packed: 113.98 lb (51.7 kg) Width Packed: 27.5" (69.85 cm) Height Packed: 31" (78.74 cm) Depth Packed: 24.75" (62.87 cm)
Peavey Electronics returns to the roots of an American tradition with the introduction of the new Delta Woods acoustic guitars. The DW series is designed to be the best-sounding, easiest-playing, full-size acoustic guitars Peavey has ever built. These new models are made using only high-end materials and a minimalistic satin finish, resulting in excellent tone and volume. Whether players are casually strumming a traditional 12-bar blues riff or exercising modern fingerpicking techniques, Peavey's Delta Woods acoustic guitars deliver rich tonal resonance and premium playability. All offer a gorgeous spruce top with mahogany back and sides for premium tone. The most notable material difference among these models is that the DW-2 and DW-2 CE both offer a solid spruce top, which offers incomparable resonance and sustain. On each DW series model, hand-carved bracing provides even tone distribution throughout each guitar's range. Each model also has a bound fingerboard and body along with a fanciful rosette, rosewood fretboard, and pearloid inlays for a premium look and feel. Other high-end appointments for the DW series include sealed tuning machines for precise and accurate tuning, pre-installed strap buttons, a compensated saddle for ideal intonation, and a wood truss rod cover for the dual-action truss rod, designed to ensure a lifetime of playability. The luxury finish offers a rustic appearance, with beautiful, natural wood grain on the back and sides, and headstock. Specifications: Dreanought Body Spruce Top Mahogany Back & Sides Mahogany Neck with Dual Action Truss Rod Wood Truss Rod Cover Rosewood Fingerboard Pearloid Dot Inlay Rosewood Bridge with Compensated Saddle Fancy Rosette Chrome Diecast Machine Heads Hand Carved Bracing Natural Satin Finish Comes with Bag
Copyright © 2024 BC Wholesalers
