The K&K Sound Aloha Twin is an internal double-sensor pickup specially designed for the ukulele. It is based on the same technology as our award-winning Pure guitar pickup. Made in USA. Installation Notes The Aloha Twin can be installed two ways: With the supplied double-sided adhesive tape in front of the bridge plate (or bridge, if no bridge plate is present) on the inside sound board. With superglue on a flat bridge plate (or directly under the bridge, if no bridge plate is present). Please note that the bridge plate must be completely flat – it will not work if the bridge plate is radiused, which means it is curved up, e.g. Mele Ukuleles.
The K&K Sound Bass Fingerboard pick up is a specially modified single pickup, ideal for capturing fingerboard sounds. Its unique size and shape allows precise placement and a preamp allows rockabilly bass players to blend in just the right amount of slap, growl, and other fingerboard sounds to achieve the exact sound and effect they desire. We suggest you place the fingerboard pickup near the top of your fingerboard, on the reverse side. Double-sided adhesive tape for installation is included.
The K&K Sound Big Island Spot is an internal single-head pickup designed for the ukulele. Installation is quick and easy. The pickup has a strong output signal and works well even without a preamp. Made in USA.
The Mandolin Twin Fusion does not require any permanent alteration to your instrument. The pickups attach to the inside of the mandolin with double-sided adhesive tape, while the carpenter jack remains on the outside of the instrument. It provides the exact same sound quality as the Mandolin Twin Internal because the pickups are mounted in the same positions. The Mandolin Twin Fusion can easily be installed by the musician. A comprehensive step-by-step installation manual descibes the process in detail. Special installation tools are provided. With acoustic amps, both Mandolin Twins work very well in passive mode. To connect to a PA system, we recommend a suitable preamp like the Pure Preamp or the Pure XLR Preamp. Mandolin Twin Fusion Cable length: 11" Pickup size: 16.5 x 23mm Impedance: High ohmic Jack: Stereo TRSS endpin jack wired mono Made in USA.
The Pure Bass pickup is designed for 4-string and 5-string acoustic bass. The Pure Bass pickup amplifies the acoustic bass with a warm, natural, and woody tone and delivers the same great performance you have come to expect from a Pure pickup.
The Bass Master Rockabilly is the first upright bass transducer system designed specifically for Rockabilly and slap bass. It combines two transducers (the Bass Max and a fingerboard pickup) to create an integrated double bass pickup system that brings out the percussive and subtle fingerboard sounds, as well as strong and warm bass tones. Each Bass Master Rockabilly can be fine-tuned via the separate bass and treble controls within the two-channel preamp, providing an infinite range of combinations for every player and any style of play. The first component, the popular Bass Max, is positioned in the bridge wing. To make the Bass Max, we combine two transducers into a "sandwich" in order to maximize and enhance vibrations captured from the entire bridge. Only one Bass Max is necessary to provide an even signal from all four (or five) strings. Its strong midrange signal is ideal for cutting through the mix in loud Rockabilly situations, or providing a warm and supportive line for country bluegrass. The fingerboard transducer's unique size and shape allows it to be precisely placed on your instrument. The preamp lets the player blend in just the right amount of slap, growl, and other fingerboard sounds to reach their audience. This allows the player to achieve the exact sound they desire. The two-channel preamp has internal gain, bass, and treble trim pots for each pickup, allowing impressive +/- 20dB tonal adjustments. External volume controls let you balance the volumes of the bridge and fingerboard transducers on the fly. A convenient belt clip is included with this compact preamp, which weighs a mere ten ounces with the battery installed. A six foot, high quality three conductor (1/4 inch stereo) cable is included to complete the package. Specifications: Wing: 22 mm diameter, 4 mm thick Fingerboard: 12.5 x 10mm, 0.7 mm thick Preamp: 3" x 3.5" x 1" Input Impedance: 1 MegOhm (each channel) Output Impedance: 10K Ohms Input: Stereo 1/4" | Output: Mono 1/4" Cable: 6 foot, 1/4" stereo plugs Power: 9 volt battery (not included)
The Bass Max is very sturdy and has a high output signal that is balanced over the whole tone range. It is suitable for both arco and pizzicato playing styles because it transmits a broader mid frequency range. This enables the musician to change playing modes without having to adjust the amplifier. The connection jack is held in place by a special attachment clamp mounted at the A and D strings between string-holder and bridge. The wrapped cable eliminates disturbance. One Bass Max will evenly pick up the tone range of the double bass. It works very well with smaller bass combo amps. Specifications: Diameter: 22 mm Thickness: 5 mm Output impedance: high ohmic Output: 1/4" Connection cable length: 6"
The Big Shot is a single-head piezo pickup, especially designed for bigger instruments with low mechanical resonance. The extra strong output signal makes it a versatile choice for a variety of instruments. These include instruments made of relatively thick material, such as the sound board of a piano. Made in USA by K&K Sound.
The Double Big Twin is a four-head upright bass transducer developed specifically for jazz bass players. Its transmission band includes very high and very low frequencies, which makes it especially suitable for jazz bass. The high frequency translation ensures a clean amplification of the finger attack with the picked bass. The low frequency translation refers to a desired very bassy sound picture. The Double Big Twin is able to pick up each string of the upright bass separately. This results in an extraordinary balance of sound, even for pizzicato playing. The Double Big Twin is easily installed with the supplied double-sided adhesive film and doesn't require modification of the instrument itself. A special attachment clamp holds the connection jack so that it can be mounted at the A and D strings between the string-holder and bridge. We highly recommend one of our K&K preamps for impedance adaptation and pre-amplification. Specifications: Diameter of each transducer head: 3/4" Height of each transducer head: 1/32" Output impedance: high ohmic Length of connection cable: 1 ft Output: Stereo 1/4" jack, soldered mono mode
Copyright © 2024 BC Wholesalers
